The implantable neurostimulator Lightpulse 100 is a quadripolar pulse generator, dedicated to the subcutaneous peripheral nerve stimulation for the treatment and control of chronic pain and based on an efficient microprocessor technology.
Lightpulse 100 has a double IS1-BI slot that allows the connection to one lead using the appropriate adapter IS1-BI.
The device is equipped with extensive programmability of parameters and outputs fully configurable.
In addition, for full freedom to choice of treatment, the doctor has the possibility to choose, at any time, the output configuration as costant voltage or constant current.
Lightpulse 100L is a tetrapolar non rechargeable (primary cell) neurostimulator that is part of a peripheral nerve stimulation system, for which has been specifically designed. Lightpulse 100L is indicated for the treatment of chronic pain by the stimulation of peripheral nerve. The neurostimulator is equipped by an in line connector with four electrodes and it accommodates one bipolar or tetrapolar lead of Neurimpulse families. Lightpulse 100L is the world’s smallest and lightest non rechargeable neurostimulator (thin 7.2 mm, volume 11 cc and weight 25.5 gr), maintaining a considerable long-lasting battery, thanks to the low value of pulse parameters. Its small size allows more flexibility in the location of the IPG to achieve more comfort for the patient. Lightpulse 100L neurostimulator offers a suitable parameters programmability to peripheral nerve stimulation and the possibility to change the configuration of the pulse in constant current or constant voltage, at every moment.
Lightpulse 102 is a tetrapolar non rechargeable neurostimulator (primary cell) that delivers stimulation through two leads to the peripheral nervous system as a treatment of chronic pain.
Lightpulse 102 is compatible with all Neurimpulse leads, bipolar or tetrapolar (in this case only two electrodes will be activated).
Lightpulse 102, thanks to its small dimensions (13 cc volume and 7.2 mm thickness) and weight (26.4 gr), offers a good comfort to the patient.
||53.4 mm||50.5 mm||53.4 mm|
|Width||37.0 mm||36.4 mm||37.0 mm|
|Thickness||7.2 mm||7.2 mm||7.2 mm|
|Weight||26.4 gr||25.5 gr||26.4 gr|
|Volume||13 cc||11 cc||13 cc|
|Connector||Double IS1-BI||1 x 4 electrodes||2 x 2 electrodes|
|Pulse amplitude||Constant voltage / constant current||Constant voltage / constant current||Constant voltage / constant current|
TESTER LIFE 300
Tester Life 300 is a temporary quadripole stimulator for use during the testing phase of therapy.
The device has a Neurimpulse standard connector that allows the connection to the lead / extension, through a special cable (TL300ADA).
The stimulator is characterized by temporary configurable outputs in voltage or current and the same extensive programmability of the installations in order to ensure an objective test as possible to definitive therapy.
In addition, the stimulator is accompanied by a leather-like pouch for easy transport and to limit the inconvenience to the patient.
Special functions allow activation of the cyclic periods of stimulation ON and OFF independently programmable.
These functions, together with a wide range of programmable parameters, make possible an efficient optimization of therapy for each patient.
An extensive diagnostic section, consisting of measures instantaneous telemetric impedance catheter, trends and historical programming, easily accessible by the programmer, you get all the information necessary for optimal operation of the stimulator in accordance with the needs of the patient.